###
DOI:
Journal of Software:1998.9(6):464-468

应用可变形模型进行曲线曲面光顺
经 玲,席 平,唐荣锡
(北京航空航天大学制造工程系,北京,100083)
Fairing 3D Curves and Surfaces Using Deformable Models
JING Ling,XI Ping,TANG Rong-xi
()
Abstract
Chart / table
Reference
Similar Articles
Article :Browse 2678   Download 2796
Received:March 04, 1997    Revised:June 09, 1997
> 中文摘要: 根据物理模型的造型技术可以从另一个角度研究曲线曲面的光顺问题.基于能量的可变形曲线曲面可用于光顺一批有误差的散乱数据点.该方法不必要求数据点有序的条件,通过在数据点与曲线和曲面之间连接假想弹簧,可以克服“光顺”和“插值”的矛盾,得到所需形状.文章采用三次B样条几何表达形式,建立了光顺模型,分析了光顺机理,并给出了一个算法和几个应用实例.
Abstract:The problem of curve and surface fairness is studied from the point of view of physics-based modeling techniques. Energy-based deformable models are used to fit a set of unorganized data points. This method needs no connectivity information about data points. The contradictory of “smooth” and “fit” can be mediated by anchoring an imaginary spring between each data point and deformable curve or surface. The cubic B-spline is adopted as the basis for the deformable curve and surface. The fairing model is established. The principle is analyzed and the algorithm is presented. Some examples are presented.
文章编号:     中图分类号:    文献标志码:
基金项目:本文研究得到国家自然科学基金资助. 本文研究得到国家自然科学基金资助.
Foundation items:
Reference text:

经 玲,席 平,唐荣锡.应用可变形模型进行曲线曲面光顺.软件学报,1998,9(6):464-468

JING Ling,XI Ping,TANG Rong-xi.Fairing 3D Curves and Surfaces Using Deformable Models.Journal of Software,1998,9(6):464-468