基于参数化存储结构的滑动窗口IP核自动生成
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

Supported by the National Natural Science Foundation of China under Grant No.60633050 (国家自然科学基金)


Automatic Generation of IPCore for Sliding-Window Operations Based on a Parameterized Memory Architecture
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    为解决目前高级综合方法在处理滑动窗口程序时存在的存储系统设计瓶颈问题,提出了参数化存储体系结构模型.采用三级存储层次,充分开发内层循环、外层循环的数据重用;采用寄存器平移策略,简化硬件设计.与相关工作相比,这种体系结构模型使用相对较少的存储资源,将程序执行速度提高了2.13倍~3.8倍,将执行频率由相关工作的69MHZ提升到了238.7MHZ.

    Abstract:

    In order to deal with the memory bottleneck in high level synthesis tools for sliding-window operation, this paper presents a parameterized memory architecture for high level synthesis to automatically generate the hardware frames for all window processing applications. A three-level memory structure is designed to use inner-loop and outer-loop data completely, and at the same time shifted registers are used to make hardware design simpler. Compared with the related works, this approach can achieve a speedup of 2.13 to 3.8 times, and enhance the execution frequency from 69MHZ to 238.7MHZ.

    参考文献
    相似文献
    引证文献
引用本文

窦勇,董亚卓,徐进辉,邬贵明.基于参数化存储结构的滑动窗口IP核自动生成.软件学报,2009,20(2):246-255

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:2007-03-13
  • 最后修改日期:2008-02-27
  • 录用日期:
  • 在线发布日期:
  • 出版日期:
您是第位访问者
版权所有:中国科学院软件研究所 京ICP备05046678号-3
地址:北京市海淀区中关村南四街4号,邮政编码:100190
电话:010-62562563 传真:010-62562533 Email:jos@iscas.ac.cn
技术支持:北京勤云科技发展有限公司

京公网安备 11040202500063号